SK12D07 VG3 PCB Mounted Miniature Slide Switch

SK12D07VG3 PCB Mounted Miniature Slide Switch is very small and not suitable for high currents.
There are three pins available. The middle pin is connected with the pin on the side where the switch is set.
This variant is turned 90 degrees so that you can switch something from the side. In addition, it has two additional pins for extra sturdy mounting on a printed circuit board.

These are needed for the Ispindel DIY electronic Hydrometer

Specifications:

• Model Number: SK12D07VG3
• Action Type: SPDT
• Terminals: 3
• Terminal Length: 3mm
• Insulation Resistance: 100m ohm Min at 500V DC
• Voltage: 500V AC for 1 min
• Pin Pitch 2mm
• Main Body Size: 8.7 x 7.3 x 7.5mm
• Knob Size: 2 x 2 x 3mm
• low power applications

Mechanical Data:

Development  Resources: demo codes, schematics, datasheets, etc

iSpindle Project: DIY electronic Hydrometer

     Hackaday serves up Fresh Hacks Every Day from around the Internet.

Instructables is a community for people who like to make things. Explore, share, and do your next project with us!

     Where the world builds software

    Raspberry Pi Foundation What would you like to make today?

    Arduino‘s mission is to enable anyone to enhance their lives through accessible electronics and digital technologies.

Wikipedia is a free online encyclopedia created and edited by volunteers worldwide and hosted by the Wikimedia Foundation.

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles and display monitors.